Product Description
FREE SHIPPING TO USA ADDRESSES
- Supports up to 400 locomotives and throttles.
- On-board USB port.
- Three RJ12 LocoNet ports
- Supports SoundFX and sound decoder programming using Digitrax SoundLoader app over USB.
- 5amp/8amp Booster with multi-scale capability.
- Built-in booster transponding detection provides Operations mode CV read back.
- Locomotive reset button.
- EZ route setup button and system editable routes.
- Improved Programming track.
- Updated design.
- Warranty by Digitrax - See their site for details. Digitrax requires all warranty claims go directly to them.
The DCS240+ is an advanced CS that is intended to be used in conjunction with an existing Digitrax installation.
The DCS240+ offers a number of features that make it ideal for large layouts, clubs, and modular groups who will be running many operators and trains.
These features included in the DCS240+ are as follows:
• Run up to 400 locos and support up to 400 throttles in command station mode
• Direct USB connection for easy computer interface
• Independent SoundFX and decoder programing function via USB port using Digitrax SoundLoader PC software
• Hardware Loco Reset button for easy clearing of mobile decoder info from DCS240+
• Option Switch (OPSW) settings for CS operation customization
• Hardware EZ Routes button for simple route setup
• Automatic CS collision detection via LocoNet. Layouts can have only one CS!
• Continuous F0-28 refresh support
• Transponding detection support on Local booster tracks
• Improved Program Track output with automatic support for Power Extender equipped locos
• All storage is in non-volatile memory, no battery changes required!
• User selectable multi-scale operation for Z, N, HO, and large-scale layouts
• Electronic Non-Volatile track voltage customization for each scale setting
In addition to your DCS240+ you’ll need:
• A DC 13.8V to 24V power supply with 5 or 8 amp capability. You may be able to use an existing DC supply if it supplies sufficient current and suitable DC voltage for the scale setting in use; typical N scale = 13.8V, HO = 15.8V and G scale = 23V.
• A Digitrax Throttle
• One or more mobile decoders for your locomotives.
Power supply not included.
